Two Pack: Double AA Water Activated Batteries

These water activated AA batteries are specifically engineered for low energy consuming items such as most Flashlights, Radio's, Alarm Clocks, LED lights and many other products with low current requirements.

Keep the batteries in their original packaging and away from humidity to ensure a shelf life of at least 10 years and in many cases much longer.

These batteries will only be activated after water is added to the battery using the provided pipette and can be re-charged 3-5 times by adding more water.

If the pipette is lost, simply dunking the battery in water for around 1 minute can power the battery in emergency situations, as long as the battery is completely wiped dry prior to use.

Please note 4 packs will become available in March 2010.

Please note that our battery will not show voltage or amp before activation, this is part of our patent and is unlike any other battery currently available. You just fill the provided water plunger with water and sit the battery on its bottom ( vertical ) then and add this water from the plunger in a hole in the top of the battery until you see water bubble up from the other hole,then you know the water reservoir is full, wait a 30 seconds to one minute to allow the water to seep into the battery and then the battery will then power up, wipe it dry and insert it in the flash light to see that it is working, you can recharge the battery when it has depleted its charge by simply adding more water, you can recharge it approximately 3 however please note that each activation will provide less hours of use than the first activation.Other aspects are that these batteries can handle the low and high temperature maximums and long shelf-life of 10+ years. If the batteries are kept dry there is no reason they would not work for far longer than 10+ years shelf life. This battery is designed to work in low voltage applications only ( LED flashlight) and will work best with our ultra low power LED flashlight designed specifically for this battery

After waiting 60 seconds for the water to seep into the battery, turn over on paper towel and wait 30 seconds for excess water to escape, dry off battery and put in flash light.